Comparison of monomethoxy‐, dimethoxy‐, and trimethoxysilane anchor groups for surface‐initiated RAFT polymerization from silica surfaces

The immobilization of reversible addition–fragmentation chain transfer (RAFT) agents on silica for surface‐initiated RAFT polymerizations (SI‐RAFT) via the Z‐group approach was studied systematically in dependence of the functionality of the RAFT‐agent anchor group. Monoalkoxy‐, dialkoxy‐, and trialkoxy silyl ether groups were incorporated into trithiocarbonate‐type RAFT agents and bound to planar silica surfaces as well as to silica nanoparticles. The immobilization efficiency and the structure of the bound RAFT‐agent film varied strongly in dependence of the used solvent (toluene vs. 1,2‐dimethoxyethane) and the anchor group functionality, as evidenced by atomic force microscopy, transmission electron microscopy, dynamic light scattering, and UV/Vis spectroscopy. Surface‐initiated RAFT polymerizations using functionalized silica nanoparticles revealed that grafted oligomers, which often occur in SI‐RAFT, are not formed within the crosslinked structures that originate from the immobilization, and that RAFT‐agent films that show less aggregation during the immobilization are more efficient during SI‐RAFT in terms of polymer grafting density. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 103–113     

Naphthalimide‐phthalimide derivative based photoinitiating systems for polymerization reactions under blue lights

Naphthalimide‐phthalimide derivatives (NDPDs) have been synthesized and combined with an iodonium salt, N‐vinylcarbazole, amine or 2,4,6‐tris(trichloromethyl)‐1,3,5‐triazine to produce reactive species (i.e., radicals and cations). These generated reactive species are capable of initiating the cationic polymerization of epoxides and/or the radical polymerization of acrylates upon exposure to very soft polychromatic visible lights or blue lights. Compared with the well‐known camphorquinone based systems used as references, the novel NDPD based combinations employed here demonstrate clearly higher efficiencies for the cationic polymerization of epoxides under air as well as the radical polymerization of acrylates. Remarkably, one of the NDPDs (i.e., NDPD2) based systems is characterized by an outstanding reactivity. The structure/reactivity/efficiency relationships of the investigated NDPDs were studied by fluorescence, cyclic voltammetry, laser flash photolysis, electron spin resonance spin trapping, and steady state photolysis techniques. The key parameters for their reactivity are provided. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 665–674     

Amphiphilic thermoset elastomers from metal‐free,click crosslinking of PEG‐grafted silicone surfactants

The hydrophobicity of silicone elastomers can compromise their utility in some biomaterials applications. Few effective processes exist to introduce hydrophilic groups onto a polysiloxane backbone and subsequently crosslink the material into elastomers. This problem can be overcome through the utilization of metal‐free click reactions between azidoalkylsilicones and alkynyl‐modified silicones and/or PEGs to both functionalize and crosslink silicone elastomers. Alkynyl‐functional PEG was clicked onto a fraction of the available azido groups of a functional polysiloxane, yielding azido reactive PDMS‐g‐PEG rake surfactants. The reactive polymers were then used to crosslink alkynyl‐terminated PDMS of different molecular weights. Using simple starting materials, this generic yet versatile method permits the preparation and characterization of a library of amphiphilic thermoset elastomers that vary in their composition, crosslink density, elasticity, hydrogel formation, and wettability. An appropriate balance of PEG length and crosslink density leads to a permanently highly wettable silicone elastomer that demonstrated very low levels of protein adsorption. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1082–1093     

The kinetics of solid-phase microextraction measured for freshly added and aged hydrophobic compounds in two different soils

The proper choice of exposure times is critical if the freely dissolved concentration of chemicals in soil porewater is to be measured via the equilibrium solid-phase microextraction (SPME) as the times to equilibrium may vary depending on compound and soil properties. To reveal the effects of compound hydrophobicity, ageing and soil organic matter content on times to equilibrium, the SPME uptake was measured for five freshly added and aged hydrophobic organic compounds (phenanthrene, pyrene, lindane, p,p′-DDT and polychlorinated biphenyl (PCB) 153) in two contrasted soils (arable and forest soil). The tested compound-soil systems behaved kinetically different. Longer equilibrium times were observed with increasing hydrophobicity of compounds for aged compared to freshly added chemicals and for the forest soil in comparison to the arable soil. The calculated soil–porewater partition coefficients (i.e. sorption coefficients, K_d) of chemicals differed between soil types mainly due to various organic carbon (OC) contents as evidenced by the comparable K_oc values (i.e. K_d values normalised to soil OC content). Similar K_oc values were also found with the various extent of ageing, indicating that both the freshly added and aged compounds linearly partitioned between the soil organic matter and porewater. Our results suggest that, for a respective compound, variations in equilibrium times may be expected depending upon the residence time and the organic matter content in soil where the longest equilibrium times seems to appear for a combination of aged compounds and high organic soils. With regard to this outcome, the effect of the level of sample depletion due to the SPME extraction (LD_SPME) on equilibrium times was assessed. At LDs_SPME of up to 10%, equilibrium times increases linearly with LDs_SPME for p,p′-DDT and PCB 153. For phenanthrene (LD_SPME<10%), and for lindane and pyrene (1.2% < LD_SPME > 40%), no clear relationships were observed.     

Synthesis and liquid crystalline behavior of bulky poly(methacrylamide)s

N‐(Bis(4‐(2‐ethylhexyloxy)phenyl)(phenyl)‐methyl)methacrylamide was synthesized and polymerized via reversible addition‐fragmentation chain‐transfer (RAFT) polymerization. The chain‐transfer agent (4‐cyano‐4‐(phenylcarbonothioylthio) pentanoic acid (CPADB)), combined with a chiral additive, and a radical initiator yielded polymers with dispersities between 1.2 and 1.4. At low concentrations, the polymers are soluble in hexanes and chloroform while at higher concentrations they swell in these solvents. Characterization of the polymers by wide‐angle X‐ray scattering (WAXS) revealed an interplanar distance of 19.0 Å. The WAXS data combined with polarized optical microscopy support a lamellar crystallization and lyotropic liquid crystalline behavior in hexanes and chloroform. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2563–2568     

Investigation of Suzuki–Miyaura catalyst‐transfer polycondensation of AB‐type fluorene monomer using coordination‐saturated aryl Pd(II) halide complexes as initiators

Novel triarylamine‐based coordination‐saturated aryl Pd(II) halide complexes ligated by PEt₃, PCy₃, and P(o‐tol)₃ were successfully synthesized by direct oxidative addition of aryl halide to the corresponding Pd(0) precursors. Suzuki–Miyaura coupling polymerization of 2‐(7‐halide‐9,9‐dioctylfluoren‐2‐yl)?1,3,2‐dioxaborinane with these Pd(II) complexes as initiators was investigated for the synthesis of poly(fluorene)s with triarylamine end group. Pd(II) complexes with PCy₃ or P(o‐tol)₃ exhibited catalytic activity and realized the catalyst‐transfer polycondensation at 75 °C and room temperature, respectively, while the polymerization using Pd(II) catalyst ligated by PEt₃ did not proceed, which indicated that the bulky phosphine ligands could facilitate the reductive elimination and further promote the polymerization. In addition, the dimeric Pd(II) complex with P(o‐tol)₃ can convert into monomeric Pd(II) intermediate with an open coordination site, which had a higher activity. The end groups of the afforded polyfluorene were analyzed by matrix‐assisted laser desorption ionization time‐of‐flight (MALDI‐TOF) mass spectrometry, in which the Ar/H end groups are indicative of the catalyst‐transfer polymerization. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1457–1463     

丹酚酸A 对H2O2 所致大鼠脑微血管内皮细胞氧化损伤保护的实验研究

目的 观察丹酚酸A 对H2O2所致大鼠脑微血管内皮细胞（RCMECs）氧化损伤的保护作用，并探讨其可能的作用机 制。方法 分离并培养大鼠脑微血管内皮细胞，用H2 O2 损伤的方法建立氧自由基损伤模型。采用丹酚酸A 进行干预后，分别测定细胞培养液中乳酸脱氢酶（LDH）活性、血栓素B2（TXB2）水平、6- 酮基前列腺素1α（6-keto-PGF1α）的含量，以及细胞内和培养液中脂质过氧化产物丙二醛（MDA）含量和超氧化物歧化酶（SOD）的活性。结果 H2O2致RCMECs 氧化损伤后，细胞LDH 释放水平、TXB2和MDA 的含量均明显增加，同时6-keto-PGF1α 含量和SOD 活性显著下降；而丹酚酸A 预处理后能呈浓度依赖性的降低RCMECs 氧化损伤后LDH 水平、TXB2含量和细胞内外的MDA 含量，提高受损细胞6-keto-PGF1α 的表达和细胞内外SOD 活性。结论 丹酚酸A 对H2O2所致RCMECs 氧化损伤具有保护作用，其机制可能与其抗氧化作用有关。     

New soft porous frameworks based on lambda-zirconium phosphate and aliphatic dicarboxylates: Synthesis and structural characterization

New dicarboxylate-functionalized pillared materials with a general formula of λ-ZrPO₄(OH)_1-x(OOC(CH₂)_nCOO)_x/2(dmso) (n=6, 8 and 10) have been prepared by post-synthesis modification of the inorganic layers of λ-zirconium phosphate (λ-ZrP), where the superficial Chloride monovalent anionic ligands of λ-layer are partially exchanged with the divalent anionic ligands of a series of long-chain aliphatic dicarboxylic acids, namely octanedioic acid, decanedioic acid and dodecanedioic acid. The synthesized materials are characterized by X-ray diffractometry, FT-IR spectrophotometry, elemental and thermogravimetric analyses. The X-ray diffraction patterns show that the obtained solid phases are pure. Furthermore, the interlayer distance of λ-ZrP systematically increases from 1.02 to 1.59 nm as a result of the incorporation of the mentioned acids inside the interlayer gallery.     

Zn( L‐proline)2 as a powerful and reusable organometallic catalyst for the very fast synthesis of 2‐amino‐4H‐benzo[g]chromene derivatives under solvent‐free conditions

An efficient route for the synthesis of 2‐amino‐4H‐benzo[g]chromenes via a three‐component coupling reaction of aldehydes, malononitrile and 2‐hydroxy‐1,4‐naphthaquinone in the presence of Zn( L ‐proline)₂ is reported. High yields, short reaction times, non‐toxicity and recyclability of the catalyst, and easy work‐up are the main merits of this protocol. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of tertiary amine‐based pH‐responsive polymers by RAFT Polymerization

Well‐defined tertiary amine‐based pH‐responsive homopolymers and block copolymers were synthesized via reversible addition‐fragmentation chain transfer (RAFT) polymerization using 4‐cyanopentanoic acid dithiobenzoate (CPAD) as the RAFT agent for homopolymers and a poly(ethylene glycol) (PEG) macro‐RAFT agent for the block copolymers. ¹H NMR and gel permeation chromatography results confirmed the successful synthesis of these homopolymers and block copolymers. Kinetics studies indicated that the formation of both the homopolymers and the block copolymers were well defined. The pKa titration experiments suggested that the homopolymers and the related block copolymers have a similar pKa. The dynamic light scattering investigation showed that all of the block copolymers underwent a sharp transition from unimers to micelles around their pKa and the hydrodynamic diameter (D_h) was not only dependent on the molecular weight but also on the composition of the block copolymers. The polymer solution of PEG‐b‐PPPDEMA formed the largest micelle compare to the PEG‐b‐PDPAEMA and PEG‐b‐PDBAEMA with a similar molecular weight. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1010–1022